Shellac baseplates in pink colour. The intermediate in making prosthesis.

Also available in mica free.

Indications

• Intermediate for making prosthesis.

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

Type 4 extra hard resin reinforced dental die stone for fixed prosthesis and implantology

Advantages

• The resin particles inside the formulation provide high elasticity and splintering resistance for optimal chamfering
• The resin particles reduce water absorption guaranteeing the accuracy of the model
• Operator safety due to a formaldehyde free formula
• All elite master colours are optimised for detection by all modern laser and optical scanners
• Low expansion, even after 48 hours

Characteristics

• High mechanical characteristics
• Compact, marble-like finish
• Accurate reproduction of detail
• Available in three different colours: Desert Sand, Sandy Brown, Soft Grey

Zhermack recommends using:

• Gypstray, for removing stone residues
• Elite mix, its fully electronic management guarantees a constant mixing quality as well as a silent operation

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

Family of air purifiers of three different sizes. They act on the stale air in any room, eliminating dust, dirt and germs. After the treatment, the air is much cleaner and more breathable. It should be emphasized that poor air quality favors the appearance of diseases, especially of a respiratory type. The purification process begins with a battery of filters of three different levels: bacterial HEPA, activated carbon and photocatalytic. Subsequently, a high-performance UV lamp continues the cleaning work. Purification is completed with ionization and the possibility of activating an ozone generator. After the treatment, we can speak of a highly purified and quality air.

Order no.223100Description (name)LISKO polishing discs, fine, whiteadditional infoContents10Unit of contentspiecesMedical device infono medical deviceCE-labeling infoitem is not labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldExcellently suited for grinding and smoothing flexible acrylics, silicones or other soft materials. They are also suited for prepolishing metal and other acrylics.UsageMax. numer of revs. 4,000/min. Especially in case of fine grain size grind under low pressure only. Wear protective glasses.Product-descriptionSoft, elastic polishing discs. Open structure, unique for the elaboration of soft materials. Available in 3 different grain sizes. The discs adapt flexibly to the contours of the surface which has to be worked. They distinguish by only small heat development, do not smear and ensure constant results due to particles which are polished off steadily.

CERAMIC SCULPTURING BRUSHES

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

For professional sports where hard and flat impacts often occur.
Additonal hard-elastic insert for integrated reinforcement in the anterior region. Kits come with
- 1 BIOPLAST® XTREME 4.0 x 125 mm, - 1 BIOPLAST ® clear 2.0 x 125 mm,
- 1 DURAN® 0.75 x 125 mm,
- 1 bag of 15 g CETRON® cleansing powder,
- 1 BIOPLAST® insulating agent,
- 1 retainer box.

Disposable impression tray made of white plastic

- Inexpensive and solid
- Excellent retention of the impression material by special “retention baskets”
- Practical: can be labelled with felt-tip pen
- Complete tray available in six sizes, partial tray available in three shapes

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

ROLLOBLAST

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

Tungsten Carbide Cutters

Standard Cross Cut

Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.

Flash-curing device for rapid and reliable curing of light curable resins

Dimensions of polymerisation chamber: 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 w
Capacity: 4 BTE-aids or 6 ITE-aids
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50/60 Hz
Power input: 250 watt
Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
Average flash power: 200 watt
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 x 310 x 140 mm
Weight: 6 kg x 140 mm Weight: 6 kg

Super hard stone

- easily redable
- colour reduced
- non splintering
- extreme hardness
- created by Andreas Nolte

Clasps with occlusal rests and elastic arms
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
mm
Ø
0,9 1009
1,0 1010
1,2 1011
10/100 pcs.

SCHEU-Anchor and J-clasps
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
mm
Ø
0,8 1020
0,9 1021
1,0 1022
1,1 1048
*10/100 pcs.
*5/50 left
5/50 right
in pairs

Clasps with occlusal rests and elastic arms
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
mm
Ø
0,9 1026
1,0 1027
10 pces

SCHEU-Anchor 1.0 mm - 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars

SCHEU J-clasps 1.0 mm - 100 Pcs

Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.