Thermoforming

BIOSTAR®
Versatile pressure moulding machine for all prostho- 230V 3000
dontic and orthodontic applications with Scan 115V 3010
technology and 6.0 bar working pressure. The unique 100V 3020
thermally controlled infrared heater reaches working
temperature in one second. All important data are printed
on each single foil and are read by the BIOSTAR Scanner
and shown on the large display. The large model cup
facilitates embedding of mounted models. The pellet
container ensures optimal dispensing and storing of the pellets.
AC: 230 V / 115 V / 100 V, 850 VA
Pressure: 0.5 – 6.0 bar
Measurements: 450 x 230 x 260 mm (l x w x h)
Weight: 14 kg

MOUTH PROTECTION

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

DURAN®
Hard-elastic, highly transparent plates, bond to acrylic.
No predrying necessary.
Application: periodontal splints,
bite guards, retainer splints,
invisible retainers,
temporary crowns and bridges,
temporary and fluoride splints.
0.5 x 125 mm 3411
0.625 x 125 mm 3409
0.75 x 125 mm 3413
1.0 x 125 mm 3415
1.5 x 125 mm 3417
2.0 x 125 mm 3419
3.0 x 125 mm 3421
10/100 pcs.

Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).

The Erkoform-3d+ has the same characteristics as the Erkoform-3dmotion but without automated thermoforming process. Also the touchpanel functions are the same. A large volume reserve vacuum is being held to allow a sudden forming. A sensor for touchless temperature measurement ensures the accurate temperature of the material for the thermoforming regardless of the ambient temperature. The unit is equipped with a medium-wave infrared heating, which doesn’t need preheating time. The medium-wave allows for the materials to heat up not only on the surface but also in-depth. The result is a less stressed splint. The Occluform-3 can be installed (accessory).

It is supplied with 1,25 mm nozzle (0,75 mm or 1 mm optional). The machine also has a pressure reducer, operation pedal and pressure gauge, so it is precise and safe to use. The support is made in stainless steel sheet.

For professional sports where hard and flat impacts often occur.
Additonal hard-elastic insert for integrated reinforcement in the anterior region. Kits come with
- 1 BIOPLAST® XTREME 4.0 x 125 mm, - 1 BIOPLAST ® clear 2.0 x 125 mm,
- 1 DURAN® 0.75 x 125 mm,
- 1 bag of 15 g CETRON® cleansing powder,
- 1 BIOPLAST® insulating agent,
- 1 retainer box.

For professional sports where hard and flat impacts often occur.
Additonal hard-elastic insert for integrated reinforcement in the anterior region. Kits come with
- 1 BIOPLAST® XTREME 4.0 x 125 mm, - 1 BIOPLAST ® clear 2.0 x 125 mm,
- 1 DURAN® 0.75 x 125 mm,
- 1 bag of 15 g CETRON® cleansing powder,
- 1 BIOPLAST® insulating agent,
- 1 retainer box.

MINISTAR S®
The new generation of the successful handy pressure 230 V 3500
moulding machine now equipped with Scan technology 115 V 3510
and 4 bar working pressure. The coded pressure 100 V 3520
moulding plate is read by the scanner, allowing
programming of all important data such as heating time,
temperature and cooling time. In other words: Precise
pressure moulding results in record time thanks to the
extremely fast, patented heater and the high working pressure.
Power: 230 V / 115 V, / 100 V, 850 VA
Working Pressure: 0.5 – 4.0 bar
Dimensions: 420 x 350 x 190 mm (l x w x h)
Weight: 9 kg

OSAMU-Retainer®-Kit 1 pc. 3242
Transparent retainer according to Dr. Yoshii.
Fabrication with pressure moulding technique using
BIOPLAST® 1,5 mm and IMPRELON „S“ 0,75 mm.
Bonding of foils with OSAMU-Bond.
OSAMU-Retainer®-Kit for fabrication of 10 retainers.

OSAMU-Bond 10/100 ml 3246
OSAMU-Polisher (grey) 2 pcs. 3247