Materials

Multilayer 3D

Layer 1 of 20% at strength +/- 600 Mpa
Layer 2 de 15% at strength+/- 660 Mpa
Layer 3 de 15% at strength de +/- 730 Mpa
Layer 4 de 15% at strength de +/- 780 Mpa
Layer 5 de 15% at strength de +/- 830 Mpa
Layer 6 de 20% at strength de +/- 900 Mpa


Composition :

Y2O3 = 9,28wt%
AI2O3 = 0,05wt%
SiO2 < 0.15wt%
CO3O4 <0.02wt%

Finished :

at 1450°C before 60 mins

Cavex CA37 Fast Set

Features :

- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth

Normal Set 1.30 minutes
Fast Set 1 minute

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C