Biocompatibel thermovormbaar materiaal.

Panavia V5 Paste Opaque réf.3615 EU

selfcuring
8,1 g

Shellac baseplates in pink colour. The intermediate in making prosthesis.

Also available in mica free.

Indications

• Intermediate for making prosthesis.

DETON Wax draad blauwSpanning gratis wax draad is niet gemakkelijk geproduceerd. We zijn blij te kunnen bieden u een spanning gratis wax draad dankzij een speciale methode en een speciaal micro-moleculaire was gebruikt voor de productie. Een wax draad van gemiddelde hardheid met een grote interne stabiliteit is het resultaat.DETON Wax draad blauw op rol, Ø 2,5 mm, 250 g Art.-Nr. 741-2500DETON Wax draad blauw op rol, Ø 3,0 mm, 250 g Art.-Nr. 742-3000DETON Wax draad blauw op rol, Ø 3,5 mm, 250 g Art.-Nr. 743-3500DETON Wax draad blauw op rol, Ø 4,0 mm, 250 g Art.-Nr. 744-4000DETON Wax draad blauw op rol, Ø 5,0 mm, 250 g Art.-Nr. 745-5000

De retentie bar Wapo lingual

Wapo de bewaring bar wordt gebruikt voor linguale totale prothesen van de onderkaak. Kenmerkend voor de bar band retentie. Steekt aan beide zijden de uiteinden van de staaf.
De bar is verkrijgbaar in drie maten: 6, 7 en 8 inch. Vormige soft bar is spanningsvrij en gemakkelijk te vervormen.

Dental modelling wax

High precision laboratory A-Silicone putty material.

Use

• Duplication of denture moulds
• Ceramics technique printed on verticulator
• Die in full dentures
• Control matrix for the design of metal structures
• Denture repair
• Bite recording key for positioning in articulator
• Matrix for use in making temporary crowns/bridges
• Matrix support for the working of metal free aesthetic materials
• Insulation of teeth/plaster in muffle

Advantages

• Very high flowability
• Superior dimensional stability
• Heat resistance (over 200°C)
• Easy handling
• Excellent detail definition
  
• Can be milled
• Linear variation: -0.058% after 24 hours
• No deformation in flask

Characteristics

• 1:1 Mixing ratio
• Biocompatible
• Final hardness 95 Shore A
• Light blue colour

Type 4 extra hard dental die stone for fixed prosthesis. Production of models and removable dies in fixed and removable prostheses

Advantages

• Simplified mixing and balanced thixotropy for easier model production
• High compressive strength
• Reduced abrasion and higher precision of model
• The silver grey colour is optimised for detection by modern laser and optical scanners
• Low expansion, even after 48 hours

Characteristics

• High mechanical characteristics
• Accurate reproduction of detail
• Thixotropic
  
• Available in five different colours: Sandy Brown, Light Amber, Silver Grey, Cream, White
  

For removing stone residues, we recommend using Gypstray

High precision laboratory A-Silicone putty material.

Use

• Duplication of denture moulds
• Ceramics technique printed on verticulator
• Die in full dentures
• Control matrix for the design of metal structures
• Denture repair
• Bite recording key for positioning in articulator
• Matrix for use in making temporary crowns/bridges
• Matrix support for the working of metal free aesthetic materials
• Insulation of teeth/plaster in muffle

Advantages

• Very high flowability
• Superior dimensional stability
• Heat resistance (over 200°C)
• Easy handling
• Excellent detail definition
  
• Can be milled
• Linear variation: -0.058% after 24 hours
• No deformation in flask

Characteristics

• 1:1 Mixing ratio
• Biocompatible
• Final hardness 95 Shore A
• Light blue colour

Expansievloeistof voor alle koudegevoelige SHERA-bekledingen.

Vertex Castapress is een zelfhardend, gietbaar basismateriaal voor tandprothesen, dat ook geschikt is voor het repareren, ondervullen en uitbreiden van partiële prothesen. Dankzij het unieke versnellingssysteem garandeert het een optimale kleurstabiliteit.

Het gebruik van acryl op frames wordt onderwezen aan de 3D Systems Vertex Dental Academy, waarbij gebruik wordt gemaakt van Vertex Castapress.

Ook verkrijgbaar in een transparante versie (Castapress Crystal Clear).

Description:Rapid Simplified is a heat-curing denture base material and forms a solid base for full and partial dentures. The pressing technique is the processing method for Rapid Simplified. This cadmium-free acrylic has a rapid 20 minutes polymerisation cycle (also overnight polymerisation is possible). Flask to be put in boiling water. Authentic pressing technique course is educated at the Vertex™ Dental Academy by using Vertex™ Rapid Simplified.Technical specifications:Dough time15 minutesWorking time30 minutesCuring time20 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer)Impact-resistance11.3 kJ/m2Flexural strength85.2 MPaFlexural modulus2367 MPaWater sorption22.5 µg/mm3Solubility0.11 µg/mm3Shades:* 1 (pale pink)* 2 (pink opaque)* 3 (translucent pink)* 4 (clear)* 5 (pink, veined)* 6 (dark pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined)* 14 (brown-pink, veined)

Hard gips, type 3

Recyclingzak voor bezinktank (20 eenheden)

Koudhardende acrylhars voor tijdelijke kronen en bruggen.

Op basis van polymethylmethacrylaat.

ALGINMAJOR - THE CLASSIC ONE
High precision alginate for impressions.
The excellent dimensional stability allows casting of the impressions after 5 days (if correctly stored in sealed container). Alginmajor exceeds ISO 1563 requirements.

MAIN FEATURES:
Taste: Fruits.
Color: Orange.
Stabilized hypoallergenic formula.
Snap setting.
Lead and cadmium free.
Excellent biocompatibility.
Dust free powder for safe working and cleaning ease.
Fast wetting time to obtain smooth and plastic consistency for easy mixing.
Excellent gypsum compatibility.
Very high compressive strength and recovery from deformation, exceeding ISO requirements.
Sale formats
A1000 Alginmajor 1 x 453 g
A1004 Alginmajor 4 x 453 g
A1024 Alginmajor 24 x 453 g

TECHNICAL DATA
Technical Standard:
ISO 1563
Mixing Time:
35"
Working Time (a 23°C):
1' 20"
Setting Time (a 23°C):
2' 00"
Recovery from deformation:
96,2%
Shelf Life:
6 years
Pour-up Time:
5 days
Sale format (bag):
453 g